Posts: 5
raimund.reh
Joined: 23 Jul 2011
#1
Hi folks
my #NC8000 has a #hardware #serial-port also #parallel-port for what I am a lucky guy.
but they seems NOT to be supported by M-16..."unable to open ttyS0" or such messages approache...
any hints&kinks how to keep them running (and NO NEED to use usb-converters-2-...)?
thanks alot...

cheers - Raimund
Posts: 850
fatmac
Joined: 26 Jul 2012
#2
Check your dmesg output.

(If my memory is right) Unable to open ttyS0 just means nothing is connected to that port.
Posts: 5
raimund.reh
Joined: 23 Jul 2011
#3
ok.. here my complete dmseg
installation has been take to a factory new hdd!

Code: Select all

$ dmesg
...
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] Local APIC disabled by BIOS -- you can enable it with"lapic"
[    0.000000] APIC: disable apic facility
[    0.000000] APIC: switched to apic NOOP
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] e820: [mem 0x60000000-0xffffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 18 pages/cpu @f6c03000 s44044 r0 d29684 u73728
[    0.000000] pcpu-alloc: s44044 r0 d29684 u73728 alloc=18*4096
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 390850
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.10-antix.1-486-smp root=UUID=ad05f4c1-2348-463b-935e-4b4d57c7af2f ro vga=788 quiet
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000377fe:0005ffd0)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 1525528K/1572280K available (6387K kernel code, 557K rwdata, 1856K rodata, 592K init, 464K bss, 46752K reserved, 0K cma-reserved, 663368K highmem)
[    0.000000] virtual kernel memory layout:
                   fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
                   pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
                   vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
                   lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
                     .init : 0xc189b000 - 0xc192f000   ( 592 kB)
                     .data : 0xc163d052 - 0xc1899500   (2417 kB)
                     .text : 0xc1000000 - 0xc163d052   (6388 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     Build-time adjustment of leaf fanout to 32.
[    0.000000]     RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
[    0.000000] NR_IRQS:2304 nr_irqs:32 16
[    0.000000] CPU 0 irqstacks, hard=f501c000 soft=f501e000
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1594.849 MHz processor
[    0.001014] Calibrating delay loop (skipped), value calculated using timer frequency.. 3189.69 BogoMIPS (lpj=1594849)
[    0.001021] pid_max: default: 32768 minimum: 301
[    0.001037] ACPI: Core revision 20150930
[    0.009229] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.009238] ACPI: setting ELCR to 0200 (from 0c00)
[    0.009265] Security Framework initialized
[    0.009269] Yama: becoming mindful.
[    0.009281] SELinux:  Disabled at boot.
[    0.009285] AppArmor: AppArmor disabled by boot time parameter
[    0.009297] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.009301] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.009691] Initializing cgroup subsys io
[    0.009703] Initializing cgroup subsys memory
[    0.009717] Initializing cgroup subsys devices
[    0.009724] Initializing cgroup subsys freezer
[    0.009729] Initializing cgroup subsys net_cls
[    0.009734] Initializing cgroup subsys perf_event
[    0.009739] Initializing cgroup subsys net_prio
[    0.009769] Disabled fast string operations
[    0.009781] mce: CPU supports 5 MCE banks
[    0.009810] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
[    0.009812] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8, 1GB 0
[    0.015656] Freeing SMP alternatives memory: 28K (c192f000 - c1936000)
[    0.018124] smpboot: weird, boot CPU (#0) not listed by the BIOS
[    0.018127] smpboot: SMP motherboard not detected
[    0.018129] smpboot: SMP disabled
[    0.018132] smpboot: Local APIC not detected. Using dummy APIC emulation.
[    0.018164] Performance Events: 
[    0.018170] no APIC, boot with the"lapic" boot parameter to force-enable it.
[    0.018172] no hardware sampling interrupt available.
[    0.018175] p6 PMU driver.
[    0.018178] ... version:                0
[    0.018180] ... bit width:              32
[    0.018182] ... generic registers:      2
[    0.018184] ... value mask:             00000000ffffffff
[    0.018186] ... max period:             000000007fffffff
[    0.018187] ... fixed-purpose events:   0
[    0.018189] ... event mask:             0000000000000003
[    0.019139] x86: Booted up 1 node, 1 CPUs
[    0.019142] smpboot: Total of 1 processors activated (3189.69 BogoMIPS)
[    0.019288] devtmpfs: initialized
[    0.019610] evm: security.selinux
[    0.019613] evm: security.capability
[    0.019732] PM: Registering ACPI NVS region [mem 0x5fff0c00-0x5fffbfff] (46080 bytes)
[    0.019768] reboot: HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
[    0.019856] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.019937] prandom: seed boundary self test passed
[    0.021217] prandom: 100 self tests passed
[    0.021222] pinctrl core: initialized pinctrl subsystem
[    0.021575] NET: Registered protocol family 16
[    0.021861] cpuidle: using governor ladder
[    0.021865] cpuidle: using governor menu
[    0.021869] PCCT header not found.
[    0.021964] clocksource: pit: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1601818034827 ns
[    0.021984] ACPI: bus type PCI registered
[    0.021987] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.025358] PCI: PCI BIOS revision 2.10 entry at 0xf031f, last bus=5
[    0.025361] PCI: Using configuration type 1 for base access
[    0.028138] ACPI: Added _OSI(Module Device)
[    0.028142] ACPI: Added _OSI(Processor Device)
[    0.028144] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.028147] ACPI: Added _OSI(Processor Aggregator Device)
[    0.048050] ACPI : EC: EC started
[    0.050067] ACPI: Interpreter enabled
[    0.050089] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[    0.050095] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[    0.050116] ACPI: (supports S0 S3 S4 S5)
[    0.050118] ACPI: Using PIC for interrupt routing
[    0.050147] PCI: Ignoring host bridge windows from ACPI; if necessary, use"pci=use_crs" and report a bug
[    0.051932] ACPI: Power Resource [C16E] (on)
[    0.052603] ACPI: Power Resource [C13E] (on)
[    0.053384] ACPI: Power Resource [C185] (on)
[    0.053916] ACPI: Power Resource [C18C] (on)
[    0.054600] ACPI: Power Resource [C196] (on)
[    0.055513] ACPI: Power Resource [C0E7] (on)
[    0.059333] ACPI: Power Resource [C205] (off)
[    0.059421] ACPI: Power Resource [C206] (off)
[    0.059500] ACPI: Power Resource [C207] (off)
[    0.059578] ACPI: Power Resource [C208] (off)
[    0.065370] ACPI: PCI Root Bridge [C045] (domain 0000 [bus 00-ff])
[    0.065381] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.065389] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.065396] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.070474] acpi PNP0A03:00: host bridge window [io  0x0cf8-0x0cff] (ignored)
[    0.070479] acpi PNP0A03:00: host bridge window [io  0x0000-0x0cf7 window] (ignored)
[    0.070483] acpi PNP0A03:00: host bridge window [io  0x0d00-0xffff window] (ignored)
[    0.070486] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored)
[    0.070490] acpi PNP0A03:00: host bridge window [mem 0x60000000-0xfec00fff window] (ignored)
[    0.070493] acpi PNP0A03:00: host bridge window [mem 0xfec02000-0xffffffff window] (ignored)
[    0.070497] acpi PNP0A03:00: host bridge window [mem 0x000d4000-0x000dffff window] (ignored)
[    0.070500] PCI: root bus 00: using default resources
[    0.070675] PCI host bridge to bus 0000:00
[    0.070680] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.070683] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[    0.070688] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.070702] pci 0000:00:00.0: [8086:3340] type 00 class 0x060000
[    0.070717] pci 0000:00:00.0: reg 0x10: [mem 0xb0000000-0xbfffffff pref]
[    0.070846] pci 0000:00:01.0: [8086:3341] type 01 class 0x060400
[    0.071008] pci 0000:00:1d.0: [8086:24c2] type 00 class 0x0c0300
[    0.071056] pci 0000:00:1d.0: reg 0x20: [io  0x38c0-0x38df]
[    0.071185] pci 0000:00:1d.1: [8086:24c4] type 00 class 0x0c0300
[    0.071232] pci 0000:00:1d.1: reg 0x20: [io  0x38e0-0x38ff]
[    0.071354] pci 0000:00:1d.2: [8086:24c7] type 00 class 0x0c0300
[    0.071401] pci 0000:00:1d.2: reg 0x20: [io  0x3c00-0x3c1f]
[    0.071537] pci 0000:00:1d.7: [8086:24cd] type 00 class 0x0c0320
[    0.071568] pci 0000:00:1d.7: reg 0x10: [mem 0xa0000000-0xa00003ff]
[    0.071651] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.071769] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060400
[    0.071858] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.071931] pci 0000:00:1f.0: [8086:24cc] type 00 class 0x060100
[    0.072011] pci 0000:00:1f.0: Enabled i801 SMBus device
[    0.072021] pci 0000:00:1f.0: can't claim BAR 13 [io  0x1000-0x107f]: address conflict with ACPI CPU throttle [io  0x1010-0x1015]
[    0.072027] pci 0000:00:1f.0: quirk: [io  0x1100-0x113f] claimed by ICH4 GPIO
[    0.072135] pci 0000:00:1f.1: [8086:24ca] type 00 class 0x01018a
[    0.072153] pci 0000:00:1f.1: reg 0x10: [io  0x0000-0x0007]
[    0.072163] pci 0000:00:1f.1: reg 0x14: [io  0x0000-0x0003]
[    0.072174] pci 0000:00:1f.1: reg 0x18: [io  0x0000-0x0007]
[    0.072185] pci 0000:00:1f.1: reg 0x1c: [io  0x0000-0x0003]
[    0.072196] pci 0000:00:1f.1: reg 0x20: [io  0x3c20-0x3c2f]
[    0.072207] pci 0000:00:1f.1: reg 0x24: [mem 0x00000000-0x000003ff]
[    0.072221] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.072224] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.072227] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.072230] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.072338] pci 0000:00:1f.3: [8086:24c3] type 00 class 0x0c0500
[    0.072385] pci 0000:00:1f.3: reg 0x20: [io  0x1200-0x121f]
[    0.072508] pci 0000:00:1f.5: [8086:24c5] type 00 class 0x040100
[    0.072529] pci 0000:00:1f.5: reg 0x10: [io  0x3000-0x30ff]
[    0.072539] pci 0000:00:1f.5: reg 0x14: [io  0x3880-0x38bf]
[    0.072550] pci 0000:00:1f.5: reg 0x18: [mem 0xa0100000-0xa01001ff]
[    0.072560] pci 0000:00:1f.5: reg 0x1c: [mem 0xa0180000-0xa01800ff]
[    0.072603] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[    0.072716] pci 0000:00:1f.6: [8086:24c6] type 00 class 0x070300
[    0.072738] pci 0000:00:1f.6: reg 0x10: [io  0x3400-0x34ff]
[    0.072748] pci 0000:00:1f.6: reg 0x14: [io  0x3800-0x387f]
[    0.072805] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[    0.072964] pci 0000:01:00.0: [1002:4e50] type 00 class 0x030000
[    0.072985] pci 0000:01:00.0: reg 0x10: [mem 0x98000000-0x9fffffff pref]
[    0.072994] pci 0000:01:00.0: reg 0x14: [io  0x2000-0x20ff]
[    0.073012] pci 0000:01:00.0: reg 0x18: [mem 0x90400000-0x9040ffff]
[    0.073036] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.073061] pci 0000:01:00.0: supports D1 D2
[    0.073162] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.073167] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
[    0.073171] pci 0000:00:01.0:   bridge window [mem 0x90400000-0x904fffff]
[    0.073176] pci 0000:00:01.0:   bridge window [mem 0x98000000-0x9fffffff pref]
[    0.073272] pci 0000:02:04.0: [168c:0013] type 00 class 0x020000
[    0.073296] pci 0000:02:04.0: reg 0x10: [mem 0x90080000-0x9008ffff]
[    0.073453] pci 0000:02:06.0: [1217:7223] type 02 class 0x060700
[    0.073477] pci 0000:02:06.0: reg 0x10: [mem 0x90180000-0x90180fff]
[    0.073504] pci 0000:02:06.0: supports D1 D2
[    0.073507] pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.073606] pci 0000:02:06.1: [1217:7223] type 02 class 0x060700
[    0.073631] pci 0000:02:06.1: reg 0x10: [mem 0x90200000-0x90200fff]
[    0.073657] pci 0000:02:06.1: supports D1 D2
[    0.073660] pci 0000:02:06.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.073764] pci 0000:02:06.2: [1217:7110] type 00 class 0x088000
[    0.073788] pci 0000:02:06.2: reg 0x10: [mem 0x90280000-0x90280fff]
[    0.073857] pci 0000:02:06.2: supports D1 D2
[    0.073861] pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.073957] pci 0000:02:06.3: [1217:7223] type 02 class 0x060700
[    0.073981] pci 0000:02:06.3: reg 0x10: [mem 0x90300000-0x90300fff]
[    0.074016] pci 0000:02:06.3: supports D1 D2
[    0.074020] pci 0000:02:06.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.074126] pci 0000:02:0d.0: [104c:8023] type 00 class 0x0c0010
[    0.074150] pci 0000:02:0d.0: reg 0x10: [mem 0x90380000-0x903807ff]
[    0.074161] pci 0000:02:0d.0: reg 0x14: [mem 0x90100000-0x90103fff]
[    0.074223] pci 0000:02:0d.0: supports D1 D2
[    0.074226] pci 0000:02:0d.0: PME# supported from D0 D1 D2 D3hot
[    0.074320] pci 0000:02:0e.0: [14e4:165e] type 00 class 0x020000
[    0.074359] pci 0000:02:0e.0: reg 0x10: [mem 0x90000000-0x9000ffff 64bit]
[    0.074402] pci 0000:02:0e.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.074436] pci 0000:02:0e.0: PME# supported from D3hot D3cold
[    0.074544] pci 0000:00:1e.0: PCI bridge to [bus 02-05] (subtractive decode)
[    0.074552] pci 0000:00:1e.0:   bridge window [mem 0x90000000-0x903fffff]
[    0.074558] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.074562] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[    0.074628] pci_bus 0000:03: busn_res: can not insert [bus 03-ff] under [bus 02-05] (conflicts with (null) [bus 02-05])
[    0.074634] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 04
[    0.074685] pci_bus 0000:05: busn_res: can not insert [bus 05-ff] under [bus 02-05] (conflicts with (null) [bus 02-05])
[    0.074690] pci_bus 0000:05: busn_res: [bus 05-ff] end is updated to 08
[    0.074694] pci_bus 0000:05: busn_res: can not insert [bus 05-08] under [bus 02-05] (conflicts with (null) [bus 02-05])
[    0.074700] pci_bus 0000:05: [bus 05-08] partially hidden behind transparent bridge 0000:02 [bus 02-05]
[    0.074757] pci_bus 0000:09: busn_res: can not insert [bus 09-ff] under [bus 02-05] (conflicts with (null) [bus 02-05])
[    0.074763] pci_bus 0000:09: busn_res: [bus 09-ff] end is updated to 0c
[    0.074767] pci_bus 0000:09: busn_res: can not insert [bus 09-0c] under [bus 02-05] (conflicts with (null) [bus 02-05])
[    0.074773] pci_bus 0000:09: [bus 09-0c] partially hidden behind transparent bridge 0000:02 [bus 02-05]
[    0.074777] pci 0000:00:1e.0: bridge has subordinate 05 but max busn 0c
[    0.074789] pci_bus 0000:00: on NUMA node 0
[    0.076328] ACPI: PCI Interrupt Link [C0C2] (IRQs *10 11)
[    0.076496] ACPI: PCI Interrupt Link [C0C3] (IRQs 10 *11)
[    0.076661] ACPI: PCI Interrupt Link [C0C4] (IRQs *10 11)
[    0.076826] ACPI: PCI Interrupt Link [C0C5] (IRQs *10 11)
[    0.076991] ACPI: PCI Interrupt Link [C0C6] (IRQs 10 *11)
[    0.077166] ACPI: PCI Interrupt Link [C0C7] (IRQs 10 *11)
[    0.077320] ACPI: PCI Interrupt Link [C0C8] (IRQs 10 11) *0, disabled.
[    0.077486] ACPI: PCI Interrupt Link [C0C9] (IRQs *10 11)
[    0.078366] ACPI: Enabled 10 GPEs in block 00 to 1F
[    0.078418] ACPI : EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
[    0.078536] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.078539] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.078542] vgaarb: loaded
[    0.078545] vgaarb: bridge control possible 0000:01:00.0
[    0.078719] SCSI subsystem initialized
[    0.078792] libata version 3.00 loaded.
[    0.078854] ACPI: bus type USB registered
[    0.078892] usbcore: registered new interface driver usbfs
[    0.078911] usbcore: registered new interface driver hub
[    0.078931] usbcore: registered new device driver usb
[    0.079092] PCI: Using ACPI for IRQ routing
[    0.079128] PCI: pci_cache_line_size set to 64 bytes
[    0.079183] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.079187] e820: reserve RAM buffer [mem 0x5ffd0000-0x5fffffff]
[    0.079413] NetLabel: Initializing
[    0.079415] NetLabel:  domain hash size = 128
[    0.079417] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.079438] NetLabel:  unlabeled traffic allowed by default
[    0.079571] clocksource: Switched to clocksource pit
[    0.088193] pnp: PnP ACPI init
[    0.088521] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.088527] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.088531] system 00:00: [mem 0x00100000-0x5fffffff] could not be reserved
[    0.088539] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.089254] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
[    0.089885] pnp 00:02: [dma 2]
[    0.089945] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.090771] pnp 00:03: [dma 1]
[    0.090905] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.090965] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.091015] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.091061] pnp 00:06: Plug and Play ACPI device, IDs SYN0109 SYN0100 SYN0002 PNP0f13 (active)
[    0.091271] system 00:07: [io  0x0140-0x014f] has been reserved
[    0.091277] system 00:07: [mem 0xffb00000-0xffbfffff] has been reserved
[    0.091281] system 00:07: [mem 0xfff00000-0xffffffff] has been reserved
[    0.091286] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.091803] system 00:08: [io  0x04d0-0x04d1] has been reserved
[    0.091808] system 00:08: [io  0x1000-0x107f] could not be reserved
[    0.091811] system 00:08: [io  0x1100-0x113f] has been reserved
[    0.091815] system 00:08: [io  0x1200-0x121f] has been reserved
[    0.091819] system 00:08: [mem 0xfec00000-0xfec000ff] has been reserved
[    0.091824] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.092780] system 00:09: [mem 0x000d3000-0x000d3fff] has been reserved
[    0.092785] system 00:09: [mem 0xfec01000-0xfec01fff] has been reserved
[    0.092790] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.092806] pnp: PnP ACPI: found 10 devices
[    0.127383] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.127415] clocksource: Switched to clocksource acpi_pm
[    0.127482] pci 0000:02:06.0: res[13]=[io  0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100
[    0.127487] pci 0000:02:06.0: res[14]=[io  0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100
[    0.127491] pci 0000:02:06.1: res[13]=[io  0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100
[    0.127495] pci 0000:02:06.1: res[14]=[io  0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100
[    0.127499] pci 0000:02:06.3: res[13]=[io  0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100
[    0.127503] pci 0000:02:06.3: res[14]=[io  0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100
[    0.127508] pci 0000:00:1e.0: bridge window [io  0x1000-0x0fff] to [bus 02-05] add_size 1000
[    0.127513] pci 0000:02:06.0: res[15]=[mem 0x04000000-0x03ffffff pref] res_to_dev_res add_size 4000000 min_align 4000000
[    0.127518] pci 0000:02:06.0: res[15]=[mem 0x04000000-0x03ffffff pref] res_to_dev_res add_size 4000000 min_align 4000000
[    0.127522] pci 0000:02:06.1: res[15]=[mem 0x04000000-0x03ffffff pref] res_to_dev_res add_size 4000000 min_align 4000000
[    0.127526] pci 0000:02:06.1: res[15]=[mem 0x04000000-0x03ffffff pref] res_to_dev_res add_size 4000000 min_align 4000000
[    0.127531] pci 0000:02:06.3: res[15]=[mem 0x04000000-0x03ffffff pref] res_to_dev_res add_size 4000000 min_align 4000000
[    0.127535] pci 0000:02:06.3: res[15]=[mem 0x04000000-0x03ffffff pref] res_to_dev_res add_size 4000000 min_align 4000000
[    0.127542] pci 0000:00:1e.0: bridge window [mem 0x02000000-0x03ffffff pref] to [bus 02-05] add_size e000000 add_align 4000000
[    0.127548] pci 0000:00:1f.0: BAR 13: [io  size 0x0080] has bogus alignment
[    0.127554] pci 0000:00:1e.0: res[15]=[mem 0x02000000-0x03ffffff pref] res_to_dev_res add_size e000000 min_align 4000000
[    0.127559] pci 0000:00:1e.0: res[15]=[mem 0x02000000-0x11ffffff pref] res_to_dev_res add_size e000000 min_align 4000000
[    0.127563] pci 0000:00:1e.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.127567] pci 0000:00:1e.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.127577] pci 0000:00:1e.0: BAR 15: assigned [mem 0x60000000-0x6fffffff pref]
[    0.127581] pci 0000:00:1e.0: BAR 13: assigned [io  0x4000-0x4fff]
[    0.127586] pci 0000:00:1f.1: BAR 5: assigned [mem 0x70000000-0x700003ff]
[    0.127595] pci 0000:01:00.0: BAR 6: assigned [mem 0x90420000-0x9043ffff pref]
[    0.127599] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.127603] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
[    0.127608] pci 0000:00:01.0:   bridge window [mem 0x90400000-0x904fffff]
[    0.127613] pci 0000:00:01.0:   bridge window [mem 0x98000000-0x9fffffff pref]
[    0.127628] pci 0000:02:06.0: res[15]=[mem 0x04000000-0x03ffffff pref] res_to_dev_res add_size 4000000 min_align 4000000
[    0.127632] pci 0000:02:06.0: res[15]=[mem 0x04000000-0x07ffffff pref] res_to_dev_res add_size 4000000 min_align 4000000
[    0.127637] pci 0000:02:06.0: res[16]=[mem 0x04000000-0x03ffffff] res_to_dev_res add_size 4000000 min_align 4000000
[    0.127641] pci 0000:02:06.0: res[16]=[mem 0x04000000-0x07ffffff] res_to_dev_res add_size 4000000 min_align 4000000
[    0.127645] pci 0000:02:06.1: res[15]=[mem 0x04000000-0x03ffffff pref] res_to_dev_res add_size 4000000 min_align 4000000
[    0.127649] pci 0000:02:06.1: res[15]=[mem 0x04000000-0x07ffffff pref] res_to_dev_res add_size 4000000 min_align 4000000
[    0.127654] pci 0000:02:06.1: res[16]=[mem 0x04000000-0x03ffffff] res_to_dev_res add_size 4000000 min_align 4000000
[    0.127658] pci 0000:02:06.1: res[16]=[mem 0x04000000-0x07ffffff] res_to_dev_res add_size 4000000 min_align 4000000
[    0.127662] pci 0000:02:06.3: res[15]=[mem 0x04000000-0x03ffffff pref] res_to_dev_res add_size 4000000 min_align 4000000
[    0.127666] pci 0000:02:06.3: res[15]=[mem 0x04000000-0x07ffffff pref] res_to_dev_res add_size 4000000 min_align 4000000
[    0.127670] pci 0000:02:06.3: res[16]=[mem 0x04000000-0x03ffffff] res_to_dev_res add_size 4000000 min_align 4000000
[    0.127675] pci 0000:02:06.3: res[16]=[mem 0x04000000-0x07ffffff] res_to_dev_res add_size 4000000 min_align 4000000
[    0.127679] pci 0000:02:06.0: res[13]=[io  0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100
[    0.127683] pci 0000:02:06.0: res[13]=[io  0x0100-0x01ff] res_to_dev_res add_size 100 min_align 100
[    0.127687] pci 0000:02:06.0: res[14]=[io  0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100
[    0.127691] pci 0000:02:06.0: res[14]=[io  0x0100-0x01ff] res_to_dev_res add_size 100 min_align 100
[    0.127695] pci 0000:02:06.1: res[13]=[io  0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100
[    0.127699] pci 0000:02:06.1: res[13]=[io  0x0100-0x01ff] res_to_dev_res add_size 100 min_align 100
[    0.127703] pci 0000:02:06.1: res[14]=[io  0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100
[    0.127707] pci 0000:02:06.1: res[14]=[io  0x0100-0x01ff] res_to_dev_res add_size 100 min_align 100
[    0.127711] pci 0000:02:06.3: res[13]=[io  0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100
[    0.127714] pci 0000:02:06.3: res[13]=[io  0x0100-0x01ff] res_to_dev_res add_size 100 min_align 100
[    0.127718] pci 0000:02:06.3: res[14]=[io  0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100
[    0.127722] pci 0000:02:06.3: res[14]=[io  0x0100-0x01ff] res_to_dev_res add_size 100 min_align 100
[    0.127727] pci 0000:02:06.0: BAR 15: assigned [mem 0x60000000-0x63ffffff pref]
[    0.127732] pci 0000:02:06.0: BAR 16: assigned [mem 0x74000000-0x77ffffff]
[    0.127735] pci 0000:02:06.1: BAR 15: assigned [mem 0x64000000-0x67ffffff pref]
[    0.127740] pci 0000:02:06.1: BAR 16: assigned [mem 0x78000000-0x7bffffff]
[    0.127744] pci 0000:02:06.3: BAR 15: assigned [mem 0x68000000-0x6bffffff pref]
[    0.127749] pci 0000:02:06.3: BAR 16: assigned [mem 0x7c000000-0x7fffffff]
[    0.127753] pci 0000:02:0e.0: BAR 6: assigned [mem 0x6c000000-0x6c00ffff pref]
[    0.127757] pci 0000:02:06.0: BAR 13: assigned [io  0x4000-0x40ff]
[    0.127760] pci 0000:02:06.0: BAR 14: assigned [io  0x4400-0x44ff]
[    0.127764] pci 0000:02:06.1: BAR 13: assigned [io  0x4800-0x48ff]
[    0.127768] pci 0000:02:06.1: BAR 14: assigned [io  0x4c00-0x4cff]
[    0.127772] pci 0000:02:06.3: BAR 13: assigned [io  0x1400-0x14ff]
[    0.127777] pci 0000:02:06.3: BAR 14: assigned [io  0x1800-0x18ff]
[    0.127783] pci 0000:02:06.0: CardBus bridge to [bus 03-04]
[    0.127786] pci 0000:02:06.0:   bridge window [io  0x4000-0x40ff]
[    0.127792] pci 0000:02:06.0:   bridge window [io  0x4400-0x44ff]
[    0.127798] pci 0000:02:06.0:   bridge window [mem 0x60000000-0x63ffffff pref]
[    0.127803] pci 0000:02:06.0:   bridge window [mem 0x74000000-0x77ffffff]
[    0.127808] pci 0000:02:06.1: CardBus bridge to [bus 05-08]
[    0.127812] pci 0000:02:06.1:   bridge window [io  0x4800-0x48ff]
[    0.127817] pci 0000:02:06.1:   bridge window [io  0x4c00-0x4cff]
[    0.127822] pci 0000:02:06.1:   bridge window [mem 0x64000000-0x67ffffff pref]
[    0.127828] pci 0000:02:06.1:   bridge window [mem 0x78000000-0x7bffffff]
[    0.127833] pci 0000:02:06.3: CardBus bridge to [bus 09-0c]
[    0.127836] pci 0000:02:06.3:   bridge window [io  0x1400-0x14ff]
[    0.127842] pci 0000:02:06.3:   bridge window [io  0x1800-0x18ff]
[    0.127847] pci 0000:02:06.3:   bridge window [mem 0x68000000-0x6bffffff pref]
[    0.127852] pci 0000:02:06.3:   bridge window [mem 0x7c000000-0x7fffffff]
[    0.127858] pci 0000:00:1e.0: PCI bridge to [bus 02-05]
[    0.127862] pci 0000:00:1e.0:   bridge window [io  0x4000-0x4fff]
[    0.127869] pci 0000:00:1e.0:   bridge window [mem 0x90000000-0x903fffff]
[    0.127875] pci 0000:00:1e.0:   bridge window [mem 0x60000000-0x6fffffff pref]
[    0.127884] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.127887] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[    0.127891] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.127894] pci_bus 0000:01: resource 1 [mem 0x90400000-0x904fffff]
[    0.127898] pci_bus 0000:01: resource 2 [mem 0x98000000-0x9fffffff pref]
[    0.127901] pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
[    0.127905] pci_bus 0000:02: resource 1 [mem 0x90000000-0x903fffff]
[    0.127908] pci_bus 0000:02: resource 2 [mem 0x60000000-0x6fffffff pref]
[    0.127912] pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
[    0.127915] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[    0.127918] pci_bus 0000:03: resource 0 [io  0x4000-0x40ff]
[    0.127922] pci_bus 0000:03: resource 1 [io  0x4400-0x44ff]
[    0.127925] pci_bus 0000:03: resource 2 [mem 0x60000000-0x63ffffff pref]
[    0.127929] pci_bus 0000:03: resource 3 [mem 0x74000000-0x77ffffff]
[    0.127932] pci_bus 0000:05: resource 0 [io  0x4800-0x48ff]
[    0.127935] pci_bus 0000:05: resource 1 [io  0x4c00-0x4cff]
[    0.127939] pci_bus 0000:05: resource 2 [mem 0x64000000-0x67ffffff pref]
[    0.127942] pci_bus 0000:05: resource 3 [mem 0x78000000-0x7bffffff]
[    0.127946] pci_bus 0000:09: resource 0 [io  0x1400-0x14ff]
[    0.127949] pci_bus 0000:09: resource 1 [io  0x1800-0x18ff]
[    0.127952] pci_bus 0000:09: resource 2 [mem 0x68000000-0x6bffffff pref]
[    0.127956] pci_bus 0000:09: resource 3 [mem 0x7c000000-0x7fffffff]
[    0.128039] NET: Registered protocol family 2
[    0.128357] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.128397] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.128472] TCP: Hash tables configured (established 8192 bind 8192)
[    0.128567] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.128588] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.128673] NET: Registered protocol family 1
[    0.129040] ACPI: PCI Interrupt Link [C0C2] enabled at IRQ 10
[    0.129043] PCI: setting IRQ 10 as level-triggered
[    0.129409] ACPI: PCI Interrupt Link [C0C5] enabled at IRQ 10
[    0.129765] ACPI: PCI Interrupt Link [C0C4] enabled at IRQ 10
[    0.130145] ACPI: PCI Interrupt Link [C0C9] enabled at IRQ 10
[    0.130282] pci 0000:01:00.0: Video device with shadowed ROM
[    0.130307] PCI: CLS 64 bytes, default 64
[    0.130404] Trying to unpack rootfs image as initramfs...
[    0.814565] Freeing initrd memory: 20480K (f57f0000 - f6bf0000)
[    0.815152] simple-framebuffer simple-framebuffer.0: framebuffer at 0x98000000, 0xeb000 bytes, mapped to 0xf8100000
[    0.815161] simple-framebuffer simple-framebuffer.0: format=r5g6b5, mode=800x600x16, linelength=1600
[    0.834197] Console: switching to colour frame buffer device 100x37
[    0.852838] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
[    0.853211] futex hash table entries: 256 (order: 2, 16384 bytes)
[    0.853260] audit: initializing netlink subsys (disabled)
[    0.853297] audit: type=2000 audit(1468687766.852:1): initialized
[    0.853681] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.857333] zbud: loaded
[    0.857488] VFS: Disk quotas dquot_6.6.0
[    0.857560] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.858269] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.858524] ntfs: driver 2.1.32 [Flags: R/W].
[    0.858639] fuse init (API version 7.23)
[    0.859422] bounce: pool size: 64 pages
[    0.859493] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.859537] io scheduler noop registered
[    0.859542] io scheduler deadline registered
[    0.859613] io scheduler cfq registered (default)
[    0.859884] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.859898] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.860070] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.880590] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.881528] ACPI: PCI Interrupt Link [C0C3] enabled at IRQ 11
[    0.881532] PCI: setting IRQ 11 as level-triggered
[    0.881848] Linux agpgart interface v0.103
[    0.881884] intel_idle: does not run on family 6 model 13
[    0.881914] GHES: HEST is not enabled!
[    0.887289] brd: module loaded
[    0.889831] loop: module loaded
[    0.890248] ata_piix 0000:00:1f.1: version 2.13
[    0.890264] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[    0.891749] scsi host0: ata_piix
[    0.891877] scsi host1: ata_piix
[    0.891956] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x3c20 irq 14
[    0.891959] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x3c28 irq 15
[    0.892673] libphy: Fixed MDIO Bus: probed
[    0.892727] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.892732] ehci-pci: EHCI PCI platform driver
[    0.892896] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.892908] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.892924] ehci-pci 0000:00:1d.7: debug port 1
[    0.896845] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    0.897131] ehci-pci 0000:00:1d.7: irq 10, io mem 0xa0000000
[    0.903036] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.903118] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.903122] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.903125] usb usb1: Product: EHCI Host Controller
[    0.903129] usb usb1: Manufacturer: Linux 4.4.10-antix.1-486-smp ehci_hcd
[    0.903132] usb usb1: SerialNumber: 0000:00:1d.7
[    0.903363] hub 1-0:1.0: USB hub found
[    0.903375] hub 1-0:1.0: 6 ports detected
[    0.903759] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.903780] ohci-pci: OHCI PCI platform driver
[    0.903801] ohci-platform: OHCI generic platform driver
[    0.903815] uhci_hcd: USB Universal Host Controller Interface driver
[    0.903945] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.903954] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.903978] uhci_hcd 0000:00:1d.0: irq 10, io base 0x000038c0
[    0.904071] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    0.904075] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.904079] usb usb2: Product: UHCI Host Controller
[    0.904082] usb usb2: Manufacturer: Linux 4.4.10-antix.1-486-smp uhci_hcd
[    0.904085] usb usb2: SerialNumber: 0000:00:1d.0
[    0.904269] hub 2-0:1.0: USB hub found
[    0.904282] hub 2-0:1.0: 2 ports detected
[    0.904535] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.904544] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.904567] uhci_hcd 0000:00:1d.1: irq 10, io base 0x000038e0
[    0.904628] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.904632] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.904635] usb usb3: Product: UHCI Host Controller
[    0.904638] usb usb3: Manufacturer: Linux 4.4.10-antix.1-486-smp uhci_hcd
[    0.904641] usb usb3: SerialNumber: 0000:00:1d.1
[    0.904829] hub 3-0:1.0: USB hub found
[    0.904839] hub 3-0:1.0: 2 ports detected
[    0.905119] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.905129] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.905154] uhci_hcd 0000:00:1d.2: irq 10, io base 0x00003c00
[    0.905214] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.905217] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.905221] usb usb4: Product: UHCI Host Controller
[    0.905224] usb usb4: Manufacturer: Linux 4.4.10-antix.1-486-smp uhci_hcd
[    0.905227] usb usb4: SerialNumber: 0000:00:1d.2
[    0.905407] hub 4-0:1.0: USB hub found
[    0.905417] hub 4-0:1.0: 2 ports detected
[    0.905686] i8042: PNP: PS/2 Controller [PNP0303:C193,PNP0f13:C194] at 0x60,0x64 irq 1,12
[    0.907306] i8042: Detected active multiplexing controller, rev 1.1
[    0.907981] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.907989] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.908072] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.908132] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.908186] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.908398] mousedev: PS/2 mouse device common for all mice
[    0.908478] ledtrig-cpu: registered to indicate activity on CPUs
[    0.908516] hidraw: raw HID events driver (C) Jiri Kosina
[    0.908746] usbcore: registered new interface driver usbhid
[    0.908748] usbhid: USB HID core driver
[    0.909058] Key type dns_resolver registered
[    0.909320] microcode: CPU0 sig=0x6d6, pf=0x20, revision=0x17
[    0.909364] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.909379] Using IPI No-Shortcut mode
[    0.909576] registered taskstats version 1
[    0.909610] zswap: loaded using pool lzo/zbud
[    0.913781] Key type encrypted registered
[    0.913794] evm: HMAC attrs: 0x1
[    0.914295] hd: no drives specified - use hd=cyl,head,sectors on kernel command line
[    0.933233] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.096811] ata1.00: ATA-8: WDC WD800BEVE-00A0HT0, 11.01A11, max UDMA/100
[    1.096816] ata1.00: 156301488 sectors, multi 16: LBA48 
[    1.096826] ata1.01: ATAPI: DW-224E-A, A.2F, max MWDMA2
[    1.100376] ata1.00: configured for UDMA/100
[    1.106181] ata1.01: configured for MWDMA2
[    1.106540] scsi 0:0:0:0: Direct-Access     ATA      WDC WD800BEVE-00 1A11 PQ: 0 ANSI: 5
[    1.106850] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    1.106922] sd 0:0:0:0: [sda] Write Protect is off
[    1.106926] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.106959] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.107332] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.136854]  sda: sda1 sda2
[    1.137187] scsi 0:0:1:0: CD-ROM            TEAC     DW-224E-A        A.2F PQ: 0 ANSI: 5
[    1.157873] sr 0:0:1:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    1.157877] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.158135] sr 0:0:1:0: Attached scsi CD-ROM sr0
[    1.158335] sr 0:0:1:0: Attached scsi generic sg1 type 5
[    1.158603] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.158977] Freeing unused kernel memory: 592K (c189b000 - c192f000)
[    1.317636] random: systemd-udevd urandom read with 31 bits of entropy available
[    1.380045] usb 4-1: new full-speed USB device number 2 using uhci_hcd
[    1.405594] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    1.461280] rtc_cmos 00:04: RTC can wake from S4
[    1.461454] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    1.461477] rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram
[    1.498165] Floppy drive(s): fd0 is 1.44M
[    1.512798] FDC 0 is a post-1991 82077
[    1.555970] thermal LNXTHERM:00: registered as thermal_zone0
[    1.555978] ACPI: Thermal Zone [TZ1] (47 C)
[    1.578565] pps_core: LinuxPPS API ver. 1 registered
[    1.578571] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.578813] PTP clock support registered
[    1.590625] thermal LNXTHERM:01: registered as thermal_zone1
[    1.590632] ACPI: Thermal Zone [TZ2] (27 C)
[    1.605946] thermal LNXTHERM:02: registered as thermal_zone2
[    1.605952] ACPI: Thermal Zone [TZ3] (16 C)
[    1.628994] usb 4-1: New USB device found, idVendor=049f, idProduct=0086
[    1.629002] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.629031] usb 4-1: Product: Bluetooth by hp
[    1.629034] usb 4-1: Manufacturer: ACTIONTEC
[    1.633357] firewire_ohci 0000:02:0d.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[    1.634065] tg3.c:v3.137 (May 11, 2014)
[    1.634414] ACPI: PCI Interrupt Link [C0C6] enabled at IRQ 11
[    1.751465] tg3 0000:02:0e.0 eth0: Tigon3 [partno(BMC5705mA3) rev 3003] (PCI:33MHz:32-bit) MAC address 00:0d:9d:8f:2c:6d
[    1.751473] tg3 0000:02:0e.0 eth0: attached PHY is 5705 (10/100/1000Base-T Ethernet) (WireSpeed[0], EEE[0])
[    1.751478] tg3 0000:02:0e.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    1.751482] tg3 0000:02:0e.0 eth0: dma_rwctrl[763f0000] dma_mask[64-bit]
[    1.816051] tsc: Refined TSC clocksource calibration: 1594.824 MHz
[    1.816059] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x16fd0b45bdb, max_idle_ns: 440795212305 ns
[    2.025791] random: nonblocking pool is initialized
[    2.073038] raid6: mmxx1    gen()  1746 MB/s
[    2.090031] raid6: mmxx2    gen()  1960 MB/s
[    2.107036] raid6: sse1x1   gen()  1253 MB/s
[    2.124036] raid6: sse1x2   gen()  1964 MB/s
[    2.141024] raid6: sse2x1   gen()  2164 MB/s
[    2.158037] raid6: sse2x1   xor()  1400 MB/s
[    2.175030] raid6: sse2x2   gen()  2378 MB/s
[    2.192024] raid6: sse2x2   xor()  1480 MB/s
[    2.192026] raid6: using algorithm sse2x2 gen() 2378 MB/s
[    2.192028] raid6: .... xor() 1480 MB/s, rmw enabled
[    2.192031] raid6: using intx1 recovery algorithm
[    2.192176] firewire_core 0000:02:0d.0: created device fw0: GUID 718b5000000000a2, S400
[    2.197483] xor: measuring software checksum speed
[    2.207022]    pIII_sse  :  4140.000 MB/sec
[    2.217022]    prefetch64-sse:  4520.000 MB/sec
[    2.217025] xor: using function: prefetch64-sse (4520.000 MB/sec)
[    2.231924] Btrfs loaded, assert=on
[    2.348395] sr 0:0:1:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    2.348405] sr 0:0:1:0: [sr0] tag#0 Sense Key : Medium Error [current] 
[    2.348413] sr 0:0:1:0: [sr0] tag#0 Add. Sense: Unable to recover table-of-contents
[    2.348419] sr 0:0:1:0: [sr0] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 02 00
[    2.348423] blk_update_request: I/O error, dev sr0, sector 0
[    2.348782] sr 0:0:1:0: [sr0] unaligned transfer
[    2.348800] sr 0:0:1:0: [sr0] unaligned transfer
[    2.348816] sr 0:0:1:0: [sr0] unaligned transfer
[    2.348832] sr 0:0:1:0: [sr0] unaligned transfer
[    2.348849] sr 0:0:1:0: [sr0] unaligned transfer
[    2.348864] sr 0:0:1:0: [sr0] unaligned transfer
[    2.348880] sr 0:0:1:0: [sr0] unaligned transfer
[    2.348896] sr 0:0:1:0: [sr0] unaligned transfer
[    2.465360] psmouse serio4: synaptics: Touchpad model: 1, fw: 5.9, id: 0x1b6eb1, caps: 0xa84793/0x100000/0x0/0x0, board id: 0, fw id: 7550
[    2.465368] psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0
[    2.511043] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[    2.821169] clocksource: Switched to clocksource tsc
[    9.428034] input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/serio5/input/input9
[   41.584212] blk_update_request: I/O error, dev fd0, sector 0
[   41.584540] floppy: error -5 while reading block 0
[   41.587416] PM: Starting manual resume from disk
[   42.076104] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   45.193348] tsc: Marking TSC unstable due to TSC halts in idle
[   45.193363] ACPI: acpi_idle registered with cpuidle
[   45.196045] clocksource: Switched to clocksource acpi_pm
[   45.223310] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input10
[   45.223320] ACPI: Sleep Button [C13A]
[   45.223419] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input11
[   45.223493] ACPI: Lid Switch [C139]
[   45.223585] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input12
[   45.223589] ACPI: Power Button [PWRF]
[   45.267563] ACPI: Battery Slot [C138] (battery absent)
[   45.267709] ACPI: Battery Slot [C137] (battery absent)
[   45.268105] ACPI: AC Adapter [C135] (on-line)
[   45.309742] intel_rng: FWH not detected
[   45.310385] ACPI: Video Device [C0D0] (multi-head: yes  rom: no  post: no)
[   45.310690] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:00/LNXVIDEO:00/input/input13
[   45.324323] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   45.361641] agpgart-intel 0000:00:00.0: Intel 855PM Chipset
[   45.377662] parport_pc 00:03: reported by Plug and Play ACPI
[   45.377724] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[   45.415184] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
[   45.448344] NET: Registered protocol family 23
[   45.473429] Detected unconfigured HP nc8000 family SMSC IrDA chip, pre-configuring device
[   45.473435] Setting up Intel 82801 controller and SMSC device
[   45.473583] found SMC SuperIO Chip (devid=0x5a rev=00 base=0x004e): LPC47N227
[   45.473598] smsc_superio_flat(): fir: 0x130, sir: 0x2f8, dma: 03, irq: 5, mode: 0x0e
[   45.473612] SMsC IrDA Controller found
                IrCC version 2.0, firport 0x130, sirport 0x2f8 dma=3, irq=5
[   45.473677] No transceiver found. Defaulting to Fast pin select
[   45.474075] IrDA: Registered device irda0
[   45.520039] wmi: Mapper loaded
[   45.859432] yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:088c]
[   45.859454] yenta_cardbus 0000:02:06.0: O2: enabling read prefetch/write burst. If you experience problems or performance issues, use the yenta_socket parameter 'o2_speedup=off'
[   45.876816] Bluetooth: Core ver 2.21
[   45.876845] NET: Registered protocol family 31
[   45.876847] Bluetooth: HCI device and connection manager initialized
[   45.876855] Bluetooth: HCI socket layer initialized
[   45.876859] Bluetooth: L2CAP socket layer initialized
[   45.876867] Bluetooth: SCO socket layer initialized
[   45.981595] yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0038, PCI irq 10
[   45.981605] yenta_cardbus 0000:02:06.0: Socket status: 30000006
[   45.981616] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [io  0x4000-0x4fff]
[   45.981623] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0x90000000-0x903fffff]
[   45.981629] pcmcia_socket pcmcia_socket0: cs: memory probe 0x90000000-0x903fffff:
[   45.981637]  excluding 0x90000000-0x9003ffff 0x90080000-0x900bffff 0x90100000-0x9013ffff 0x90180000-0x901bffff 0x90200000-0x9023ffff 0x90280000-0x902bffff 0x90300000-0x9033ffff 0x90380000-0x903bffff
[   45.981672] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0x60000000-0x6fffffff pref]
[   45.981678] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x6fffffff:
[   45.981705]  excluding 0x60000000-0x6fffffff
[   45.988312] yenta_cardbus 0000:02:06.1: CardBus bridge found [103c:088c]
[   46.039292] usbcore: registered new interface driver btusb
[   46.096828] [drm] Initialized drm 1.1.0 20060810
[   46.110635] yenta_cardbus 0000:02:06.1: ISA IRQ mask 0x0038, PCI irq 10
[   46.110644] yenta_cardbus 0000:02:06.1: Socket status: 30000006
[   46.110651] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #05 to #08
[   46.110665] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge window: [io  0x4000-0x4fff]
[   46.110670] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge window: [mem 0x90000000-0x903fffff]
[   46.110676] pcmcia_socket pcmcia_socket1: cs: memory probe 0x90000000-0x903fffff:
[   46.110683]  excluding 0x90000000-0x9003ffff 0x90080000-0x900bffff 0x90100000-0x9013ffff 0x90180000-0x901bffff 0x90200000-0x9023ffff 0x90280000-0x902bffff 0x90300000-0x9033ffff 0x90380000-0x903bffff
[   46.110712] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge window: [mem 0x60000000-0x6fffffff pref]
[   46.110717] pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x6fffffff:
[   46.110739]  excluding 0x60000000-0x6fffffff
[   46.119300] yenta_cardbus 0000:02:06.3: CardBus bridge found [103c:088c]
[   46.241822] yenta_cardbus 0000:02:06.3: ISA IRQ mask 0x0038, PCI irq 10
[   46.241832] yenta_cardbus 0000:02:06.3: Socket status: 30000006
[   46.241840] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #08 to #0c
[   46.241854] yenta_cardbus 0000:02:06.3: pcmcia: parent PCI bridge window: [io  0x4000-0x4fff]
[   46.241861] yenta_cardbus 0000:02:06.3: pcmcia: parent PCI bridge window: [mem 0x90000000-0x903fffff]
[   46.241867] pcmcia_socket pcmcia_socket2: cs: memory probe 0x90000000-0x903fffff:
[   46.241875]  excluding 0x90000000-0x9003ffff 0x90080000-0x900bffff 0x90100000-0x9013ffff 0x90180000-0x901bffff 0x90200000-0x9023ffff 0x90280000-0x902bffff 0x90300000-0x9033ffff 0x90380000-0x903bffff
[   46.241911] yenta_cardbus 0000:02:06.3: pcmcia: parent PCI bridge window: [mem 0x60000000-0x6fffffff pref]
[   46.241917] pcmcia_socket pcmcia_socket2: cs: memory probe 0x60000000-0x6fffffff:
[   46.241943]  excluding 0x60000000-0x6fffffff
[   46.287196] ACPI Warning: SystemIO range 0x0000000000001200-0x000000000000121F conflicts with OpRegion 0x0000000000001200-0x0000000000001205 (\_SB_.C045.C058.C088) (20150930/utaddress-254)
[   46.287214] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   46.321722] ACPI: PCI Interrupt Link [C0C7] enabled at IRQ 11
[   46.321816] ath5k 0000:02:04.0: registered as 'phy0'
[   46.634134] ath: EEPROM regdomain: 0x60
[   46.634139] ath: EEPROM indicates we should expect a direct regpair map
[   46.634144] ath: Country alpha2 being used: 00
[   46.634147] ath: Regpair used: 0x60
[   46.959314] [drm] radeon kernel modesetting enabled.
[   46.959494] checking generic (98000000 eb000) vs hw (98000000 8000000)
[   46.959501] fb: switching to radeondrmfb from simple
[   46.959619] Console: switching to colour dummy device 80x25
[   46.963339] [drm] initializing kernel modesetting (RV350 0x1002:0x4E50 0x103C:0x088C).
[   46.963374] [drm] register mmio base: 0x90400000
[   46.963380] [drm] register mmio size: 65536
[   46.963688] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
[   46.963711] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[   46.963758] radeon 0000:01:00.0: putting AGP V2 device into 4x mode
[   46.963807] radeon 0000:01:00.0: GTT: 256M 0xB0000000 - 0xBFFFFFFF
[   46.963816] [drm] Generation 2 PCI interface, using max accessible memory
[   46.963829] radeon 0000:01:00.0: VRAM: 128M 0x0000000098000000 - 0x000000009FFFFFFF (64M used)
[   46.965452] [drm] Detected VRAM RAM=128M, BAR=128M
[   46.965462] [drm] RAM width 128bits DDR
[   46.973140] [TTM] Zone  kernel: Available graphics memory: 441630 kiB
[   46.973147] [TTM] Zone highmem: Available graphics memory: 773314 kiB
[   46.973153] [TTM] Initializing pool allocator
[   46.973179] [TTM] Initializing DMA pool allocator
[   46.973265] [drm] radeon: 64M of VRAM memory ready
[   46.973273] [drm] radeon: 256M of GTT memory ready.
[   46.973321] [drm] radeon: power management initialized
[   46.973348] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[   46.975555] radeon 0000:01:00.0: WB disabled
[   46.975575] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000b0000000 and cpu addr 0xf8028000
[   46.975586] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   46.975591] [drm] Driver supports precise vblank timestamp query.
[   46.975619] [drm] radeon: irq initialized.
[   46.975672] [drm] Loading R300 Microcode
[   47.151098] input: PC Speaker as /devices/platform/pcspkr/input/input14
[   47.366841] [drm] radeon: ring at 0x00000000B0001000
[   47.366876] [drm] ring test succeeded in 1 usecs
[   47.367223] [drm] ib test succeeded in 0 usecs
[   47.375284] [drm] Panel ID String: LGP                     
[   47.375292] [drm] Panel Size 1400x1050
[   47.375393] [drm] No TV DAC info found in BIOS
[   47.375493] [drm] Radeon Display Connectors
[   47.375497] [drm] Connector 0:
[   47.375500] [drm]   VGA-1
[   47.375505] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[   47.375508] [drm]   Encoders:
[   47.375511] [drm]     CRT1: INTERNAL_DAC1
[   47.375514] [drm] Connector 1:
[   47.375517] [drm]   DVI-D-1
[   47.375520] [drm]   HPD1
[   47.375524] [drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[   47.375526] [drm]   Encoders:
[   47.375529] [drm]     DFP1: INTERNAL_TMDS1
[   47.375532] [drm] Connector 2:
[   47.375535] [drm]   LVDS-1
[   47.375539] [drm]   DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68
[   47.375542] [drm]   Encoders:
[   47.375544] [drm]     LCD1: INTERNAL_LVDS
[   47.375547] [drm] Connector 3:
[   47.375550] [drm]   SVIDEO-1
[   47.375552] [drm]   Encoders:
[   47.375555] [drm]     TV1: INTERNAL_DAC2
[   47.573402] [drm] fb mappable at 0x98040000
[   47.573408] [drm] vram apper at 0x98000000
[   47.573410] [drm] size 5914624
[   47.573412] [drm] fb depth is 24
[   47.573413] [drm]    pitch is 5632
[   47.578097] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   47.578525] ath5k: phy0: Atheros AR5212 chip found (MAC: 0x56, PHY: 0x41)
[   47.578529] ath5k: phy0: RF5111 5GHz radio found (0x17)
[   47.578532] ath5k: phy0: RF2111 2GHz radio found (0x23)
[   47.642167] fbcon: radeondrmfb (fb0) is primary device
[   47.937093] Console: switching to colour frame buffer device 175x65
[   48.140260] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[   48.140286] [drm] Initialized radeon 2.43.0 20080528 for 0000:01:00.0 on minor 0
[   48.294237] ppdev: user-space parallel port driver
[   48.406127] iTCO_vendor_support: vendor-support=0
[   48.434179] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   48.434245] iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060)
[   48.435123] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   48.589270] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[   48.589285]  excluding 0xc0000-0xd3fff 0xe0000-0xfffff
[   48.589316] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[   48.589322]  excluding 0xa0000000-0xa01fffff
[   48.589357] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[   48.589367]  excluding 0x60000000-0x60ffffff
[   48.589549] pcmcia_socket pcmcia_socket2: cs: memory probe 0x0c0000-0x0fffff:
[   48.589556]  excluding 0xc0000-0xd3fff 0xe0000-0xfffff
[   48.589586] pcmcia_socket pcmcia_socket2: cs: memory probe 0xa0000000-0xa0ffffff:
[   48.589591]  excluding 0xa0000000-0xa01fffff
[   48.589625] pcmcia_socket pcmcia_socket2: cs: memory probe 0x60000000-0x60ffffff:
[   48.589635]  excluding 0x60000000-0x60ffffff
[   48.589810] pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0fffff:
[   48.589816]  excluding 0xc0000-0xd3fff 0xe0000-0xfffff
[   48.589846] pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff:
[   48.589851]  excluding 0xa0000000-0xa01fffff
[   48.589886] pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff:
[   48.589896]  excluding 0x60000000-0x60ffffff
[   48.634053] snd_intel8x0 0000:00:1f.5: intel8x0_measure_ac97_clock: measured 50381 usecs (2428 samples)
[   48.634061] snd_intel8x0 0000:00:1f.5: clocking to 48000
[   52.104168] NET: Registered protocol family 17
[   53.213531] Adding 2120576k swap on /dev/sda2.  Priority:-1 extents:1 across:2120576k FS
[   53.317257] EXT4-fs (sda1): re-mounted. Opts: (null)
[   53.740272] device-mapper: uevent: version 1.0.3
[   53.740490] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[   55.050443] wlan0: authenticate with 00:15:0c:35:a9:97
[   55.060572] wlan0: send auth to 00:15:0c:35:a9:97 (try 1/3)
[   55.066256] wlan0: authenticated
[   55.066481] ath5k 0000:02:04.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[   55.066488] ath5k 0000:02:04.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[   55.067045] wlan0: associate with 00:15:0c:35:a9:97 (try 1/3)
[   55.073457] wlan0: RX AssocResp from 00:15:0c:35:a9:97 (capab=0x451 status=0 aid=2)
[   55.073553] wlan0: associated
[   55.318846] NET: Registered protocol family 10
[   55.322323] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   55.639317] RPC: Registered named UNIX socket transport module.
[   55.639326] RPC: Registered udp transport module.
[   55.639330] RPC: Registered tcp transport module.
[   55.639334] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   55.695275] FS-Cache: Loaded
[   55.741169] FS-Cache: Netfs 'nfs' registered for caching
[   55.781491] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   65.414972] systemd-logind[3060]: New seat seat0.
[   65.438142] systemd-logind[3060]: Watching system buttons on /dev/input/event5 (Power Button)
[   65.438514] systemd-logind[3060]: Watching system buttons on /dev/input/event6 (Video Bus)
[   65.438807] systemd-logind[3060]: Watching system buttons on /dev/input/event4 (Lid Switch)
[   65.439234] systemd-logind[3060]: Watching system buttons on /dev/input/event3 (Sleep Button)
[   65.488897] systemd-logind[3060]: Failed to start user service, ignoring: Unknown unit: user@1000.service
[   65.508477] systemd-logind[3060]: New session 1 of user raimund.
[   75.303455] sr 0:0:1:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[   75.303469] sr 0:0:1:0: [sr0] tag#0 Sense Key : Medium Error [current] 
[   75.303480] sr 0:0:1:0: [sr0] tag#0 Add. Sense: Unable to recover table-of-contents
[   75.303489] sr 0:0:1:0: [sr0] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 02 00
[   75.303494] blk_update_request: I/O error, dev sr0, sector 0
[   75.303552] sr 0:0:1:0: [sr0] unaligned transfer
[   75.303586] sr 0:0:1:0: [sr0] unaligned transfer
[   75.303615] sr 0:0:1:0: [sr0] unaligned transfer
[   75.303645] sr 0:0:1:0: [sr0] unaligned transfer
[   75.303675] sr 0:0:1:0: [sr0] unaligned transfer
[   75.303704] sr 0:0:1:0: [sr0] unaligned transfer
[   75.303733] sr 0:0:1:0: [sr0] unaligned transfer
[   75.303763] sr 0:0:1:0: [sr0] unaligned transfer
[   75.367464] sr 0:0:1:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[   75.367480] sr 0:0:1:0: [sr0] tag#0 Sense Key : Medium Error [current] 
[   75.367492] sr 0:0:1:0: [sr0] tag#0 Add. Sense: Unable to recover table-of-contents
[   75.367502] sr 0:0:1:0: [sr0] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 02 00
[   75.367509] blk_update_request: I/O error, dev sr0, sector 0
[   75.367577] sr 0:0:1:0: [sr0] unaligned transfer
[   75.367617] sr 0:0:1:0: [sr0] unaligned transfer
[   75.367657] sr 0:0:1:0: [sr0] unaligned transfer
[   75.367694] sr 0:0:1:0: [sr0] unaligned transfer
[   75.367731] sr 0:0:1:0: [sr0] unaligned transfer
[   75.367768] sr 0:0:1:0: [sr0] unaligned transfer
[   75.367805] sr 0:0:1:0: [sr0] unaligned transfer
[   75.367842] sr 0:0:1:0: [sr0] unaligned transfer
[   75.421577] sr 0:0:1:0: [sr0] unaligned transfer
[   75.421613] REISERFS warning (device sr0): sh-2006 read_super_block: bread failed (dev sr0, block 16, size 512)
[   75.421647] sr 0:0:1:0: [sr0] unaligned transfer
[   75.421675] REISERFS warning (device sr0): sh-2006 read_super_block: bread failed (dev sr0, block 128, size 512)
[   75.477669] sr 0:0:1:0: [sr0] unaligned transfer
[   75.477721] EXT4-fs (sr0): unable to read superblock
[   75.532577] sr 0:0:1:0: [sr0] unaligned transfer
[   75.532621] EXT4-fs (sr0): unable to read superblock
[   75.587576] sr 0:0:1:0: [sr0] unaligned transfer
[   75.587617] EXT2-fs (sr0): error: unable to read superblock
[   75.651411] sr 0:0:1:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[   75.651423] sr 0:0:1:0: [sr0] tag#0 Sense Key : Medium Error [current] 
[   75.651435] sr 0:0:1:0: [sr0] tag#0 Add. Sense: Unable to recover table-of-contents
[   75.651445] sr 0:0:1:0: [sr0] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 02 00
[   75.651452] blk_update_request: I/O error, dev sr0, sector 0
[   75.651488] SQUASHFS error: squashfs_read_data failed to read block 0x0
[   75.651494] squashfs: SQUASHFS error: unable to read squashfs_super_block
[  302.404777] ttyS0: LSR safety check engaged!

so how?
lucky to get any help to kepp my serial-port running also my par-port

cheers for now - Raimund
Posts: 5
raimund.reh
Joined: 23 Jul 2011
#4
I also check out setserial with...

$ setserial -a /dev/ttyS0
/dev/ttyS0: No such device

it seems that antix doesn't identify build in hardware serial device.
earlier antix releases where able to handle...
Posts: 5
raimund.reh
Joined: 23 Jul 2011
#5
hi Folks...
Problem NOT solved.
I download M13.1 386 full
and
run install (NO HP NOTEBOOK option!)
with NO cheatcode

and it works on my HP NC8000 notebook.

Question:
will"antix M-16 386 full" act like M-13...???

cheers - Raimund
anticapitalista
Posts: 5,955
Site Admin
Joined: 11 Sep 2007
#6
What is M13.1?

If you mean antiX-13.1, then try installing an older kernel in antiX-16 via the metapackage-installer. ie the legacy 3.7.10 one.