Posts: 21
mckemie
Joined: 06 Nov 2011
#1
With much help from BitJam, I have a hard drive install mostly working. Here are the remaining issues:
1) Sound. inxi -F tells me no sound cards were found. I have a card that used to use the sb module to which I used to supply some parameters via modprobe. No sb module in this kernel. What is supposed to handle sound blaster type sound cards?
2) In an attempt to access my CUPS server, I installed cups-client. I hoped to see a CUPS script pop up in /etc/init.d but did not. My browser doesn't see anything at localhost:631. Apparently, iceape is not looking for network printers. What to do? Install all the CUPS stuff?
3) I have a Buffalo PCMCIA wifi card that works without any trouble. However, other previously trouble-free cards are not recognized. A US Robotics and, I think, a Motorola. I thought those cards also used the oronico driver.
Posts: 4,164
rokytnji
Joined: 20 Feb 2009
#2
For question 1. What does lspci -n at


========= SCRAPER REMOVED AN EMBEDDED LINK HERE ===========
url was:"http://kmuto.jp/debian/hcl/"
linktext was:"http://kmuto.jp/debian/hcl/"
====================================


identify as far as exact ID for your soundcard chip because sound blaster is too generic of a term to help find a solution.

2. No idea because I don't print.

3. Not enough info like what chipsets exactly those cards use.

Glad to hear though
With much help from BitJam, I have a hard drive install mostly working.
Posts: 1,062
Dave
Joined: 20 Jan 2010
#3
2. did you install only cups-client? If so I would install"cups",

Code: Select all

apt-get -f install cups
as for 1 + 3, I agree with rokytnji there is not enough information.
Last edited by Dave on 29 Nov 2011, 22:07, edited 1 time in total.
Posts: 21
mckemie
Joined: 06 Nov 2011
#4
Dave wrote:2. did you install only cups-client? If so I would install"cups",

Code: Select all

apt-get -f install cups
as for 1 + 2, I agree with rokytnji there is not enough information.
Thanks, that did it. cups-client plus cups. Or maybe cups alone triggers loading of cups-client. Anyway, I now see from my antiX the printer on a Ubuntu print server.

On the sound card, I guess I did not make myself clear. The sound card works on earlier kernels. It requires the sb module to be loaded and certain parameters to be set. Apparently, the sb module is not used in newer kernels. I wish to know what module(s) have replaced the old sb module.

BTW, the sound card does not show up with LSPCI. Maybe it's not a PCI device?

Anyone care to remind me how to extract information on PCMCIA wifi cards?
Posts: 117
buttcoffee
Joined: 20 Aug 2010
#5
lspci -v

maybe your sound device is hooked up to a usb or something

lsusb
Posts: 21
mckemie
Joined: 06 Nov 2011
#6
I've recently been testing ConnochaetOS and have gotten a lot farther than with AntiX:

========= SCRAPER REMOVED AN EMBEDDED LINK HERE ===========
url was:"http://www.connochaetos.org/forum/topic.php?post=7752#post7752"
linktext was:"http://www.connochaetos.org/forum/topic ... 2#post7752"
====================================
Posts: 1,062
Dave
Joined: 20 Jan 2010
#7
mckemie wrote: My browser doesn't see anything at localhost:631.
I had just had this problem after an upgrade in testing, the problem was that the"lo" interface is not being brought up.
I issued the following commands and it worked again.
ifconfig lo up
service cups restart