anticapitalista
Posts: 5,955
Site Admin
Joined: 11 Sep 2007
#16
d_o try it again. Sometimes, on first use, gtk-youtubeviewer does that, or is very slow to connect, but it does get there. (or it should)
Posts: 630
Eino
Joined: 12 Oct 2012
#17
dolphin_oracle wrote: but the gtk-youtube viewer doesn't work, at least not in 64bit on VB. I get an"mplayer: could not connect to socket error" followed by an"mplayer: no such file or directory". I'll try it on real hardware in a bit...left my lappy at home.
It dose not work for me ether, I just did an upgrade preserving my home directories. After making a few adjustments. Everything is running perfectly except for the youtube viewer. I'm running 64 bit also.

I like the clean shorter menus, To everyone involved . Job Well Done !!!

Edit from earlier, It dose work you need to wait for it lol
Posts: 2,238
dolphin_oracle
Joined: 16 Dec 2007
#18
Oh, OK. Good to know.
Posts: 75
equimanthorn
Joined: 28 Sep 2008
#19
rust collector wrote:Instruction on the new download? it works fine?
or are you doing a dist-upgrade?
Excuseme R.C. I'm talking about dist-upgrade...

I'm also waiting for the script from Anticapitalista.

Is the first time and I want to try to dist-upgrade Antix
Posts: 347
Silent Observer
Joined: 08 Aug 2013
#20
Well. I was installing sun-jre-updater on my 32-bit antiX 13.1 Base/Full hybrid (installed as Base, but has the Full Control Center and Synaptic added), and noticed an"unchanged" -- came back after and checked, it was a bunch of stuff including one called antix-base-files (as I recall), as well as upgrades for gpg, xorg, and other stuff that slipped past me. Did I just get 13.2 by accident (not a bad thing, it seems to still run well), or was that just upgrades I haven't seen previously because I still can't seem to find an update notifier for antiX?
Posts: 667
jdmeaux1952
Joined: 01 Nov 2013
#21
It broke...Had it up and running on an Intel i3,and an AMD FX 4410 with no problems as a LIVE CD. But when I went down this morning to my Pentium III 996 Mhz, it died.//Won't even boot up from disk..TONS of FAILED notations. And my Pentium is my testing machine that I primarily use for linux...

How would you use the DELTA file? __{{emoticon}}__
anticapitalista
Posts: 5,955
Site Admin
Joined: 11 Sep 2007
#22
Those errors are usually down to the cd or cd fevide. Did you burn at slow speed (x4)?
It really can make a difference on old boxes. Newer ones are usually ok at writing and reading cd isos even at fast burn.

Delta patches are for users that have earlier iso files (the actual files) and instaed of downloading 700MB, download the correct patch and follow the instructions here:


========= SCRAPER REMOVED AN EMBEDDED LINK HERE ===========
url was:"http://antix.mepis.org/index.php?title=Xdelta"
linktext was:"http://antix.mepis.org/index.php?title=Xdelta"
====================================


Use the instructions for xdelta3
Posts: 4,164
rokytnji
Joined: 20 Feb 2009
#23
Shoot. Decisions,decisions. Gotta think about this.

Code: Select all

demo@antiX1:~
$ inxi -Fxz
System:    Host: antiX1 Kernel: 3.7.10-antix.5-486-smp i686 (32 bit, gcc: 4.8.1) 
           Desktop: IceWM 1.3.7 Distro: antiX-13.2_386-full Luddite 4 November 2013
Machine:   System: IBM product: 679421U
           Mobo: IBM model: IBM Bios: IBM version: 20KT46AUS date: 06/04/2004
CPU:       Single core Intel Pentium 4 CPU (-UP-) cache: 256 KB flags: (pae sse sse2) bmips: 3588.13 clocked at 1794.066 MHz 
Graphics:  Card: NVIDIA NV6 [Vanta/Vanta LT] bus-ID: 01:00.0 
           X.Org: 1.12.4 drivers: nouveau (unloaded: fbdev,vesa) Resolution: 1024x768@85.0hz 
           GLX Renderer: Mesa DRI nv05 x86/MMX/SSE2 GLX Version: 1.2 Mesa 8.0.5 Direct Rendering: Yes
Audio:     Card: Intel 82801BA/BAM AC'97 Audio Controller driver: snd_intel8x0 ports: 1c00 1840 bus-ID: 00:1f.5 
           Sound: Advanced Linux Sound Architecture ver: k3.7.10-antix.5-486-smp
Network:   Card-1: Intel 82801BA/BAM/CA/CAM Ethernet Controller driver: e100 ver: 3.5.24-k2-NAPI port: 2000 bus-ID: 02:08.0
           IF: eth0 state: down mac: <filter>
           Card-2: Realtek RTL8187B Wireless 802.11g 54Mbps Network Adapter usb-ID: 001-002
           IF: N/A state: N/A mac: N/A
Drives:    HDD Total Size: 48.5GB (16.1% used) 1: id: /dev/sda model: WDC_AC28400R size: 8.5GB 
           2: id: /dev/sdb model: IC35L040AVVA07 size: 40.0GB 
Partition: ID: / size: 895M used: 20M (3%) fs: rootfs ID: swap-1 size: 1.17GB used: 0.00GB (0%) fs: swap 
Sensors:   System Temperatures: cpu: 23.0C mobo: N/A 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 84 Uptime: 10 min Memory: 113.8/1134.6MB Runlevel: 5 Gcc sys: 4.7.2 
           Client: Shell (bash 4.2.37) inxi: 1.9.16 
root@antiX1:/home/demo# blkid
/dev/loop0: TYPE="squashfs" 
/dev/sda1: LABEL="/data" UUID="D734-3B3E" TYPE="vfat" 
/dev/sr0: LABEL="antiXlive" TYPE="iso9660" 
/dev/sdb1: UUID="5e6d4bb9-198e-4a6d-a39e-0d6451e8a949" SEC_TYPE="ext2" TYPE="ext3" 
/dev/sdb2: UUID="9c06fd44-1273-469e-a2e7-371defd9a220" SEC_TYPE="ext2" TYPE="ext3" 
/dev/sdb3: UUID="48072200-9a78-49a3-a8f2-2446cb94e45c" TYPE="swap" 
root@antiX1:/home/demo# fdisk -l

Disk /dev/sda: 8 GB, 8447362560 bytes
255 heads, 63 sectors/track, 1027 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System 
/dev/sda1               1        1028     8257378    b  FAT32
Warning: Partition 1 does not end on cylinder boundary.

Disk /dev/sdb: 40 GB, 40015987200 bytes
255 heads, 63 sectors/track, 4865 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System 
/dev/sdb1   *           1        1167     9373896   83  Linux
/dev/sdb2            1168        4723    28555537   83  Linux
/dev/sdb3            4724        4865     1132582   82  Linux swap
Warning: Unable to open /dev/sr0 read-write (Read-only file system).  /dev/sr0 has been opened read-only.
Error: Invalid partition table - recursive partition on /dev/sr0.
First. I liked that when I picked the F keys at grub screen for automount all. Fstab jumped right in and wrote the entries on bootup. /dev/sda1 is a ooooooooooooooooooooold IBM 3.5 IDE Travelstar taken out of a junked
Aptiva that was found in a dumpster with my other dumpster Emachine. It is empty.

Code: Select all

demo@antiX1:~
$ df -h /dev/sda1
Filesystem      Size  Used Avail Use% Mounted on
/dev/sda1       7.9G  4.0K  7.9G   1% /media/sda1
/dev/sdb is a 40 gig IDE with MacPup 529 (I think) and Semplice on it. I like the Macpup because this IBM M41 has a floppy and every great once in a while I gotta use it. Macpup handles that quite well.So It is not leaving.

Code: Select all

demo@antiX1:~
$ cd /media
demo@antiX1:/media
$ ls
fd0  sda1  sdb1  sdb2
Anyways. I am leaning towards stripping Semolice of what I need to keep and slap on /dev/sda1 as backup, etc.....

Install AntiX 13.2 over Semplice. Currently I have grubn4dos handling the boot duties on mbr.
Then the little devil on my shoulder says. Why not double boot and put AntiX 13.2 as a frugal install
on 8 gig drive. Slap backup of data of Semplice on a pendrive. Use the Semplice partition for
storage. I used to have a 60 gig drive instead of the 8 gig one in that IBM drive slot but it went belly up and that one had my AntiX 13.1 and Vector 7 STD Gold installs on it. This used to be a quad booter with
AntiX grub handling the booting duties with chainloading grub 2.

As a side note to the above poster above Anti. It took me a few tries booting my cd on this old DVDROM drive on this Tower. I had to slap it and blow some air and talk dirty to it before I finally got to the AntiX screen. I always Md5sum and also burn my cds real slow on my good laptop that is newer than any I have. So even with all
that premptive paranoia going on. I knew a good bitch slap was all this tower needed to boot up the cd.
Hope that works for you.

Shoot. Decisions, decisions. What is a poor ignorant biker to do?
Posts: 4,164
rokytnji
Joined: 20 Feb 2009
#24
Lot's going on since I posted last. Real world stuff so just a quick update since my last post.
I will be busy with other stuff so I won't get to this computer for a while. Anyhows.

Code: Select all

demo@antiX1:~
$ cd /media
demo@antiX1:/media
$ ls
fd0  sda1  sdb1  sdb2  sdc  sdd
demo@antiX1:/media
$ cd sdc
demo@antiX1:/media/sdc
$ ls
Alarms   DCIM       LOST.DIR  Notifications  Podcasts
Android  documents  Movies    PerfectViewer  Ringtones
Books    Download   Music     Pictures       status.txt
That is with my Android 4 Tablet (4" Iview) connected. I used SpaceFM to mount it. USB Storage is turned on in Android so AntiX can see it. I don't think anything after Android 4 (like Android 4.2) will work like this.
That means my Blackberry Phone (9530) should show up just fine also when plugged into usb also.
Posts: 2,238
dolphin_oracle
Joined: 16 Dec 2007
#25
on the 32bit 13.2 install (from the new iso), connectshares is requiring a sudo password. I do not have this issue on the 64bit 13.2 that is dist-upgraded from 13.1. Any ideas?

***edit***

got it. the / etc / sudoers.d / antixers configuration file is not correct. There is a antixers.dpkg-dist that looks like it should have copied to antixers but has not.
Posts: 1,308
BitJam
Joined: 31 Aug 2009
#26
As root, add another entry in / etc/sudoers.d/antixers using the others as a template.

Like the other entries, you need to provide the full path to the executable:

/usr/local/bin/connectshares

This should fix the problem. I don't know if this is the official solution.
Posts: 2,238
dolphin_oracle
Joined: 16 Dec 2007
#27
There is an extra flie (antixers.dpkg-dist) that looks like the it should be the antixers. The .dpkg-dist file has all the entries that the 64bit antixers has (at least on my two machines). I just did

# cp antixers.dpkg-dist antixers

as root and all is well. There are other missing entries as well, such as update-default-desktop, that are in the .dpkg-dist version.

in the 64bit updgrade version, there is also a debian.list.dpkg-dist in / etc / apt / sources.list.d that is a match for debian.list. There doesn't look like any change in debian.list though is its just an extra file.
Posts: 1,308
BitJam
Joined: 31 Aug 2009
#28
Good catch D.O.!
anticapitalista
Posts: 5,955
Site Admin
Joined: 11 Sep 2007
#29
d.o ok will fix and upload the appropriate debs asap
Posts: 2,238
dolphin_oracle
Joined: 16 Dec 2007
#30
FYI the 64bit iso also has the antixers sudo issue.